2nd or 4th Gear to Start Semi Truck UPDATED

2nd or 4th Gear to Start Semi Truck

The 18 speed transmission is strong, versatile and easy to apply, once you lot get the hang of the pattern and if you are experienced with manual transmissions.

It's not the easiest of transmissions if you are only starting to learn to bulldoze a tractor trailer.

Versatility is the best feature of the 18 speed.

Table of Contents

• Shift Pattern For an 18 Speed
• Steps to Shifting an 18 Speed Transmission
• 18 Speed Transmission Shift Pattern Diagram (Gear Pattern)
  • iii Reverse Gears
  • 3 LO Gears
  • fifteen Forrard Gears
• 7 Shifting Tips For Truckers
• Related Articles
• F.A.Q'Due south – Manual Shifting

The commuter can always accept the right gear to keep the truck engine running at the right RPM to save fuel and help the truck engine concluding.

For nigh truck drivers, the 18 speed transmission has more gears than y'all'll always need to use, unless perhaps you're pulling trains in the mountains or heavy weight.

There's a gear for all situations a driver might encounter.

Shift Pattern For an xviii Speed

The 18 speed transmission is laid out in an 'H' pattern.

The easiest way to go familiar with the 18 speed is to practise shifting in an H pattern.

• The driver uses second, third, 4th, and fifth, then splits up into loftier range. And then, shift the H design again for sixth, seventh, eighth and ninth gear.

• After reaching ninth gear, split upward to overdrive for the elevation gear.

At that place are plenty of other gears in between, as all main gears have a high range and low range, and so that the driver tin carve up any of the gears, twice more.

Information technology might sound a scrap complicated at first, just it's really not.

The more a commuter practices, and the more than experience he gains, he may find that the gear being used, may not exist quite the right one for where he wants the RPM'S to be.

In that case, they can exist split upwards or down accordingly, matching the RPM'Due south to the engine's sweet spot.

Drivers who like floating gears should like the 18 speed, every bit 12 of the xviii gears available do non require moving the shifter, every bit they are split gears.

Related > How to Float Gears in a Semi Truck

Steps to Shifting an 18 Speed Manual

The 18 speed transmission is laid out in an 'H' pattern. The easiest mode to get familiar with the eighteen speed is to do shifting in an H blueprint.

• The driver uses 2nd, tertiary, fourth, and fifth, and so splits upwards into loftier range and so shift the H pattern once more for sixth, seventh, 8th and ninth gear.

• After reaching ninth gear, split up to overdrive for the top gear.

At that place are plenty of other gears in betwixt.

Related >five Tips For Truckers For Effective Employ of Cruise Command

eighteen Speed Transmission Shift Pattern Diagram (Gear Pattern)

This is a very unproblematic basic diagram of the shifting pattern of an 18 speed transmission.

This is the best mode to sympathise the positioning of all 18 gears.

3 Reverse Gears

•   There are 3 reverse speeds in reverse. Why? Good question.

iii LO Gears

• In that location may be times when yous're trying to lift a heavy load from a dead stop. Or mayhap you are trying to get a set of loaded B trains going from a dead stop later chaining up on a grade. (Gears i,two,3rd position)

In this situation, the 3 low forward starting gears of the 18 speed, are just the ticket to a smooth start.

It's piece of cake to get a heavy load rolling without abusing the clutch.

15 Forrad Gears

• At that place are 15 forward gears in 3 'H Positions'

For the boilerplate driver, many of these gears will never be used.

Information technology depends on the weight of the load, terrain and several other factors.

REMEMBER: Learning to shift an 18 speed manual blueprint is not hard. Nonetheless, it does take some practice time to shift smoothly.

7 Shifting Tips For Truckers

• Practice. Shifting properly is kind of similar riding a cycle. The more y'all do, the better y'all'll go at it.

• Every truck is different. You can have 2 trucks, identically spec'ed and they'll shift differently. Every truck shifts just a little differently. It's like they each have their own personality.

• Find the sugariness spot. Just take the time to go to know what your truck likes. Find where the sweet  spots are.

• Be methodical. Shifting should be done slowly and methodically. Feather the clutch and feather the fuel to help slide it into gear.

• Shift smoothly. Never try to force a gear. Information technology isn't necessary. It will slide in virtually on its own if everything is lined up simply correct (the speed, the RPM and the shifter.)

• Don't rush. Relax. Information technology'southward not something to be rushed.

• Did I mention exercise? And yes. Practice, practise, practice.

AS SEEN ON THE Popular YOUTUBE CHANNEL!

Related Articles

F.A.Q'Due south – Manual Shifting

If I exam for my CDL with simply an automatic transmission truck, will I have a restriction placed on my license?

Yes, there will be a brake on the CDL, which does not allow you to drive a transmission manual truck. Best to take the ability to drive both a transmission and an automated manual truck.

Shifting gears in a truck looks really complicated. Is it hard to do?

In one case you larn the 'shifting pattern', shifting gears manually is not that hard. Only, information technology does take practice to shift gears correctly and smoothly, and so every bit not to do impairment to the manual of the truck.

Does it affair if I can drive a manual transmission, at present that many companies are switching to automated transmissions?

It'southward skilful to take as many qualifications as possible as a professional truck driver. Adding a restriction to your CDL, that you aren't able to drive a manual transmission truck, lowers your chances of getting a truck driving chore. Not all trucking companies have automated manual trucks.

Can I shift without the clutch?

Aye, it is possible to shift without the use of the clutch. Information technology'south called 'floating gears', past some. Some say it's difficult on the drive line, some say information technology's not. There's no right or wrong answer. Depends who you ask.

My shifting is very crude. What'due south the secret to shifting a transmission manual smoothly?

Smoothen shifting a manual transmission is truly an art. Practicing is the best mode to do it properly and smoothly.

Why do some truckers 'float gears' while others 'double clutch'?

This boils downwards to personal preference. When starting from a complete stop, it'southward usually best to double clutch.

DOWNLOAD HERE

2nd or 4th Gear to Start Semi Truck UPDATED

Posted by: patriciaandell.blogspot.com